Wednesday, May 12, 2004

NAV on OS X deletes entire Eudora mailbox files

MacInTouch Home Page: "Notes and Tips

Alan Claver offered some good tips for avoiding Norton AntiVirus's bad habit of destroying entire mailbox files:

The problem is that the virus signature appears in clear text within the mailbox file and/or spool files of Eudora. This text is matched by NAV and depending on your options the file is either deleted or quarantined (with predicably bad results).
Not every definition file appeara to have these signatures but when they are downloaded and incorporated into NAV, these issues occur.
The fix for this is to exclude the folder which contains the IMAP and/or SPOOL folders from NAV real-time and scheduled scan configurations. For the standard Eudora 6.x installation on OS X:

* POP mail folder: {home}/Eudora Folder/Mail Folder
* IMAP folder: {home}/Eudora Folder/IMAP Folder/{mailbox folders}
* SPOOL folder: {home}/Eudora Folder/Delivery Folder

Don't just exclude the entire IMAP folder because the Attachment folder for the particular IMAP account is located there and that folder must be scanned (since that's where the virus files are dropped)."

Monday, May 10, 2004

resolving iPhoto blurring?

iPhoto 4, Macintouch

Terrell Smith

Indeed, iPhoto does do far too much blurring. It can be corrected simply by clicking on one of the brightness/contrast sliders in Edit. You will then see the picture snap into focus."

Outlook's propensity to lose custom views

Text of a usenet post -- I'll link to the thread when it's published ...

Ok, I'm sorry for the multiple posts from this am, but I hope you'll agree that in sum they're useful. I'm thrilled someone else is working to track this down.

I may have a workaround for the bug. Others can test this out. I think it only works with Outlook 2003 and exchange server.

First -- what we know & speculate:

1. This is an old bug. Custom views have been disappearing since Outlook 98.
2. It doesn't happen to everyone! It probably requires Exchange server problems or some other oddity. I use multiple PST files, for example.
3. Custom views USED to be stored in views.dat. So pre-2003 users of Outlook can happily back up views.dat and be fine. Lucky dogs!
4. The problem MAY be related to synchronization between the multiple locations of custom views, including PST files, OST files, Exchange server etc.
5. If custom views have "folder scope", rather than being "PST scope" or "All folder scope", I wonder if they're less likely to vanish?

Now the new thing.

Outlook 2003 has a new feature -- one can "copy" folder design. The help file text for this is incoherent. I don't know if it really works. This is what I'm testing to backup and restore my custom views. I'm trying to create the views only with "folder scope".

1. Create a new PST file called "ViewsBackup" and create empty folders in it for Calendar, Tasks, etc.
2. Click on my empty Calendar folder. Then chose File:Folder:Copy Folder Design. Select the SOURCE folder for the Views. In theory this should copy Views to the "ViewsBackup" folder. Repeat for each of the main folders (Calendar, etc)
3. Exit Outlook and backup (I zipped it) the "ViewsBackup.pst" file.

Next time I lose my custom views, I'll try restoring them from either ViewsBackup.pst or ViewsBackup.zip (whichever works).

meta: outlook, bug, defect, exchange, synchronization, data loss, custom views, custom view, filter, disappear, vanish, lose, disappearing, outlook 2003, gone, jfaughnan, jgfaughnan

update

This June 2000 article describes how older versions of outlook stored custom views.

update II

Ok, this is interesting. There's a LOT of broken stuff in this part of Outlook. Playing with this domain I broke views in many interesting ways, including varying views appearing from click to click, parts of the views list disappearing, etc.

1. /cleanviews is a command line option that's handy to get the views working again.
2. The only views I can copy from one folder to another (using the method outlined above), are views created with scope of "this folder, visible to everyone". I think "All xxx Folders" causes odd conflicts when copied, and "This Folder, Visible only to me" doesn't work at all.
3. The Copy Folder Design / Views & Forms doesn't do a full overwrite. I'm not sure what it does when names collide, or if it only matches on names. If a view name does not exist at the target it adds the view name.

Using Command lines with Outlook 2003

Using Command lines with Outlook 2003

Very nice reference, some handy troubleshooting solutions.

Sunday, May 09, 2004

TechTV | Secrets of the iPod - troubleshooting

[This post was updated and revised 11/27/05.]

TechTV | Secrets of the iPod is a decent summary of advanced troubleshooting techniques, here are the key points with my emphases and corrections/comments]
Resetting the iPod

If your iPod's locked up, you can perform the equivalent of a hard boot by holding down the Menu and Play buttons for about seven seconds. This forces the iPod to restart, and hopefully allows it to function as it should.

[jf: This is incorrect. This is a partial reset, which does not resolve the 'unresponsive center button' problem which sometimes afflicts my 3rd generation (3G, smooth wheel, docking port) iPod. A proper reset requires the iPod be attached to a power supply, then switch the hold button to "on" (hold), then switch to "off" (red does not show on hold area) then hold Menu & Play. A full reset will solve my unresponsive center button; a state where part of the iPod behaves as though the device were locked.]

Disk Mode

Is your iPod missing in action when you plug it in to your Mac or PC? You can attempt to force your iPod's attention on your computer by invoking Disk Mode on your iPod. To do so, plug your iPod into your computer's FireWire or USB 2.0 port, use the reset button combination described above and, when you see the Apple logo, press and hold the Previous and Next buttons. In short order, your iPod should display the Do Not Disconnect message and mount on your PC or Mac.

[jf: My 3G iPod will mount by FireWire, but not USB. I might try this.]

Restoring your iPod

If you have to routinely reset your iPod or force it into Disk Mode, you should give serious thought to restoring it (iPod-speak for reformatting). Doing so erases everything on the device -- music files, calendars, contacts, notes, and any other data you've copied to it -- so be sure you have a backup of the material.

To restore your iPod, simply connect it to your computer and run the appropriate iPod Software Updater application. Be very careful that you update your iPod with the appropriate version of the Updater. A third-generation iPod can't be updated with the Updater intended for earlier iPods, but a Windows iPod can be (and a 3G Windows iPod won't work correctly with the newer software). Use only iPod Software 1.3 Updater and earlier for first- and second-generation iPods, and iPod Software 2.0 Updater and later for the current third-generation iPods.

[jf: As of 10/12/05 Apple's updater is supposed to work for all devices. The last OS revision for the 3G iPod was 2.3. Just prior to this release the universal updater didn't work on 3G iPods, but this version dhttp://www.blogger.com/img/gl.link.gifid for me.]

Scan the disk

The iPod has the ability to scan its hard drive for errors and repair some of those errors. If you suspect your iPod's drive is slightly funked up, try scanning the disk.

To do so, reset the iPod, and when you see the Apple logo, press and hold the Previous, Next, Select, and Menu buttons. An animated icon of a disc will appear along with a progress bar. This test can take 15 to 20 minutes, so be patient. If your iPod doesn't have a good charge, plug it in to a power source before scanning the disk.
Older iPods could also be placed in a diagnostic mode(methodshop):
1. You need to restart your iPod before putting it into Diagnostic Mode. Check that your hold switch is off by sliding the switch away from the headphone jack. Toggle it on and off to be safe.

2. Press and hold the following combination of buttons buttons simultaneously for approximately 10 seconds to reset the iPod.

* iPod 1G to 3G: "Menu" and "Play/Pause"
* iPod 4G+ and Mini: "Menu" and "Select"

3. The Apple logo will appear and you should feel the hard drive spinning up. Press and hold the following sequence of buttons:

o iPod 1G to 3G: "REW", "FFW" and "Select"
o iPod 4G+ and Mini: "Back" and "Select"

You will hear an audible chirp sound (3G models and higher) and the Apple logo should appear backwards. You are now in Diagnostic Mode.

4. Navigate the list of tests using "REW" and "FFW". The scroll wheel will not function while in diagnostic mode... (see link for rest of directions)