I put a basic bike kit together for my daughter (currently in college with her bike) including a companion shared iCloud Note. I think the note is kind of useful, so here it is for reuse:
(Charge these when you get home then every 2-3 weeks even if not used)
Bike Light (NiteRider)
Rear Bike Light Blinky
Multi tool in saddle bag
Chain lube (dry)
General Lube for derailleurs, other parts
Inner tube spare
Patch kit and pressure gauge
Bicycle Pumps (floor and mini)
Cable and kryptonite locks and keys
Look for loose parts
- Picture below of tire lever (remove tire), schraeder adapter (carry just in case, is small, can carry by putting on one of your valve stems) and a small pump that doesn’t work great but better than nothing.
Options before patching a flat
- See if bike shop nearby
- Call a friend to help or bring home
- Maybe uber?
- Remove tire and replace with new tube
- Remove tire and tube, patch and replace.
Links to directions
Using speedier lever - https://www.youtube.com/watch?v=ZbO_03rKyPk
How to patch a flat (REI)
Things to know
- This is the hardest thing most people do on a bike.
- Some tires are really hard to remove and getting tire back on can be hard (Usually have to do with thumbs but speedier lever can be used. Most tools just make a hole in the tube.)
- It’s quite easy to trap a bit of tube under tire. I like to inflate a bit then pinch tire all around the rim trying to free any trapped tube. Then deflate, repeat pinch, then inflate.
- Inflation options include: floor pump (best), mini-pump, CO2 canister (meh), gas station pump with Schrader adapter below
Using the Schrader valve adapter
- You need to undo the top Presta valve!
- Put on adapter
- Fill in small steps, but some modern gas station pumps may be slower to fill. Don’t overfill, can blow tire off rim in some older pumps.